N2 Biomedical LLC is a leading provider of surface modification services for improving the performance of medical devices. Previously under the name Spire Biomedical, the company offers customized coatings and surface treatments to meet a variety of performance improvement needs, including reduced wear, enhanced bone in-growth, higher lubricity, antimicrobial properties, radiopacity, and electrical conductivity/insulation.
NACS Inc. is a complete resource for GMP contract manufacturing and scalable custom automation/production needs. The company offers end-to-end production services, including prototype development, scalable production(s), complete automation, contract manufacturing, and turnkey production delivery. NACS is focused on scalable solutions allowing the market to pull future capital expenditures.
Nakata USA Ltd.'s ITRO treatment is a surface treatment system based on a concept by which a nano-scale silicon oxide layer is formed on the surface of a coated substrate by oxidizing flame with a flame burner. It improves adhesiveness to various materials, such as metal, glass, plastic, and silicone.
NAMSA is a medical research organization (MRO) accelerating product development through integrated laboratory, clinical, and consulting services. Driven by its regulatory expertise, its MRO® Approach plays an important role in translational research, applying a unique combination of disciplines—consulting, preclinical, toxicology, microbiology, chemistry, clinical, and quality—to move clients' products through the development process.
Nanotec Electronic US offers integrated brushless DC servo motors; DC servo controls with built-in drivers, all fully programmable; step and direction, analog in, or optional network slave-EtherCAT; Ethernet IP; Modbus TCP and RTU or CANopen; plug-and-drive studio for setup, programming, and tuning; step motors Nema 8 through Nema 42; brushless motors 22 mm through Nema 34; step motor linear actuators; encoders; and gearboxes.
Natech Plastics is a team of engineers and manufacturers with a core competency in injection molding. We support clients in the design and manufacture of products with injection-molded components.
National Manufacturing Company Inc. offers precision deep and shallow drawn metal stampings for global customers in the aerospace, defense, medical, electronic, and battery industries. It offers custom complex shapes with tight tolerances, difficult-to-draw materials, in-house tool design and fabrication, cell manufacturing, lean, six-sigma CI, and concurrent engineering and statistical tools. ISO 9001, AS9100C, ISO 13485, and ITAR compliant.
National Metal Stampings Inc. is a custom, short-run metal stamping facility specializing in low-cost lifetime tooling on production runs of 50 to 100,000 pieces. The company has been an innovator in the short-run metal stamping industry for more than 35 years. It services the commercial, aerospace, medical, industrial, and automotive industries.
National Power Corp. is a leading custom battery pack designer and assembler. The company's strength is its ability to design and manufacture battery packs that meet customers' mechanical, electrical, and quality requirements. Strategic alliances with the world’s leading cell manufacturers combined with its engineering expertise assure the best portable power solution for every product.
The National Standards Authority of Ireland (NSAI) is an industry-leading notified body providing medical device approvals and certification services for ISO 13485, CMDCAS, MDSAP, and CE Marking. The company embraces the responsibility of delivering a true customer-focused, time-to-market service that provides its clients with a competitive edge and promotes their position in the global medical device marketplace.
National Wire and Cable Corp. is a manufacturer of wire, cable, and molded assembly products for a variety of medical applications, including rugged use and specialized molded interconnect systems. The company's vertically integrated manufacturing assures high levels of service and quality with rapid turnaround.
Natvar, a Tekni-Plex business unit, is a global supplier of medical tubing for the medical device industry. With five plants located in the United States, Central America, Europe, and Asia, the company provides the majority of global-leading device companies with unique, precision-crafted tubing. On-site engineering teams are available to assist customers in developing tubing to meet their requirements. ISO 13485 certified.
Nautilus Systems Inc. is a leading provider of adhesive component placement machines and automation. The company's systems are used worldwide to automatically feed, peel, and apply virtually any die-cut adhesive component, including labels, films, foils, adhesives, and more. Nautilus will be demonstrating its PL Series of precision applicators (+/– 0.1 mm placement accuracy) and its PR100 print-and-apply applicators.
NB (Nippon Bearing) Corp. of America is a premier manufacturer of innovative linear technology specializing in linear ball bearing and guide rail systems. The company offers quality and reliable mechanical components. Technologies include anti-cage creep cross roller bearings, all stainless carriages, stainless ball splines, linear bushings, linear shafts, and precision ball screw actuators.
With more than 450 years of history in Japan, the NBK brand has always stood for design, manufacturing, and excellent service. The company provides high-precision, high-performance coupling and machinery products to support North American growth in machine tools, semiconductor, robotics, medical, and more. NBK's MITI award-winning Seki Garden Factory in Japan has produced innovative couplings, such as the XG series.
NDT Laboratories LLC provides a full range of nondestructive testing services—radiography, penetrants, mag particle, and ultrasonic—to high-reliability manufacturers that can’t afford to fail. The company is NADCAP accredited, time tested, and industry approved. Located in Sunnyvale, California, NDT Laboratories has been an expert in nondestructive testing since 1964.
Nectar is an award-winning product development company located in Long Beach, California. The development experts provide turnkey product development, from concept-through-manufacturing to engagement at any stage in the process. Nectar specializes in medical devices, scientific instruments, industrial equipment, and high-tech consumer goods. The company's team holds more than 70 patents.
NeedleTech Products Inc., founded in 1988 and located in North Attleboro, Massachusetts, is a leading medical contract manufacturer providing a wide range of custom specialty needles, cannulas, stylets, and similar steel components, along with advanced overmolding capability. Markets served include interventional radiology, interventional oncology, pain management, pharma, and spine. Visit the company's booth or Web site to learn more.
Nelipak® Healthcare Packaging designs, develops, and manufactures custom thermoformed packaging products that provide superior protection for medical devices and pharmaceuticals, including medical trays and blisters, surgical procedure trays, pharmaceutical handling trays, custom-built sealing machines, and other value-added services. The company delivers superior quality through world-class manufacturing at each of its global locations.
Nelson Labs is an industry-leading provider of global lab testing and expert consulting services. The company performs more than 400 rigorous microbiological and analytical laboratory tests across the medical device, pharmaceutical, and tissue industries. Nelson is regarded as a best-in-class partner with a strong track record of collaborating with customers to solve complex issues.
Nelson-Miller Inc. is a Los Angeles–based designer and manufacturer of human-machine interface components.
Nemko USA provides quality system certifications to ISO 9001 and ISO 13485 in addition to its EMC, product safety, wireless testing, precompliance, and certification services. Certifications also include CE marking (MDD), CB, and FCC.
Neostarpack is devoted to providing the best 10 to 100 bpm bottling solutions. The company's pproducts cover every stage in a bottle packaging process, including bottle washers, tablet/capsule counters, liquid fillers, cappers and cap tighteners, and labelers. Based on its 15 years of experience, it has expertise in providing both tabletop and whole-plant solutions. Neostarpack looks forward to optimizing customers' experience of production.
NeuraLabel is a complete label printing solution for the prime/commercial and GHS/BS5609/regulatory markets. The company pairs breakthrough technology with innovative software to offer the best desktop label printers, unwinders/rewinders, and finishers available.
New England Small Tube Corp. provides small-diameter tube bending and fabrication. Capabilities include burr-free cutting, bending, brazing, swaging, flaring, bulging, micropolishing, electropolishing, passivation, and Teflon coating. The company is a specialist in custom fabrication of sampling and reagent probes, preheater tubes, dispensing manifolds, and well-plate tips.
New England Tubing Technologies designs and manufactures specialty extruded tubing and medical braids; including multilumen, multi-durometer, braid-reinforced tubing, and custom eTubing hybrid configurations. The company's advanced extrusion expertise and extensive wire processing capabilities enable it to provide the most technologically advanced tubing products in the industry.
NHBB and Myonic are specialized manufacturers of precision ball bearings and mechanical subassemblies for leading medical device OEMs. Custom-engineered solutions for surgical instruments, robotics, cardiovascular devices, and diagnostic equipment feature the latest bearing technology, including ceramic balls, machined polymer retainers, noncorrosive coatings, and specialty lubes. NHBB and Myonic are part of the MinebeaMitsumi Group.
New Journey Packaging Inc. is a California-based packaging supplies company established by a group of U.S. and overseas industry veterans and packaging factories. The company specializes in manufacturing and sourcing custom bags, films, high-impact retail boxes/packaging, and a wide range of shipping supplies. New Journey's goal is to provide both a superior customer experience and tremendous value for its customers.
New Value Medical is an innovation company focused on material development mainly for advanced wound care.
Newport Corp. is a part of MKS Instruments, a global leader in instruments and process control solutions for semiconductor, industrial, defense, life sciences, and research markets. The company's products are derived from expertise in pressure/vacuum measurement and control, materials delivery, gas generation and analysis, process control, photonics, lasers, and motion control.
Nikon Metrology Inc. offers a broad range of metrology solutions for applications ranging from miniature electronics to the largest aircraft. The company’s innovative measuring and precision instruments contribute to a high-performance design-through-manufacturing process that allows manufacturers to deliver premium quality products in a shorter time.
Ningbo Linstant Polymer Materials Company Ltd. is a professional manufacturer of accessories for medical devices, combining research, design, and production as a whole to provide one-to-one customized solutions for minimally invasive medical device companies. Based on customer requirements, the company applies medical-grade PP, PE, PA, TPU, PC, PEBAX, PEEK, and other materials
Nippon Chemical Screw is one of the largest injection molders of PEEK fasteners and offers thousands of off-the-shelf plastic screws, nuts, washers, and springs.
Nippon Mektron Ltd. offers manufacturing and sales of flexible circuits. The company has 21 factories in 10 countries.
Nisino Seiki Company Ltd. is a prototyping company that quickly manufactures prototype parts from a single piece to meet customers' needs. The company handles production as small as a sesame seed, quickly producing lots as small as one with handmade modeling technology and fine-pressed parts.
Nitto Kohki USA Inc. offers linear motor-free piston air compressors and vacuum pumps featuring quiet, oil-free operation with long life. The company's "Delvo" screwdrivers are professional-use, high-quality tools offering precise control of torque. Nitto Kohki quick connects are for pneumatic, hydraulic, leak test, and purity applications—with a range of materials options for the coupler body and seal.
NKT Photonics Inc. is a leading supplier of high-performance fiber lasers, fiber-optic sensing systems, and photonic crystal fibers. The company's main markets are within imaging, sensing, and material processing. NKT's products include ultrafast lasers, supercontinuum white light lasers, low-noise fiber lasers, distributed temperature sensing systems, and a wide range of specialty fibers.
NN Inc., a diversified industrial company, combines advanced engineering and production capabilities with in-depth materials science expertise to design and manufacture complex orthopedic and spine instruments and implants on a global basis. The company partners with leaders in the orthopedic and spine industry to bring innovation and world-class quality to design, development, and production of reusable and single-use disposable devices.
Noanix Corp. is a medical coatings firm. The company manufactures and provides coating systems, coating solutions, and coating services for hydrophilic coatings, hydrophobic coatings, drug-eluting coatings, antimicrobial coatings, antithrombogenic coatings, and many other medical coatings.
Nobilis Metals, a Berkshire Hathaway business, is among the largest precious metal mills in North America. It has more than 100 years of experience in the production of rod, wire, tube sheet, foil, strip, ribbon, and other components. It processes thousands of tons of precious metal alloy products annually and leverages on-site labs to certify purity and quality. It increased its capacity to make platinum alloy wires with dimensions to 0.0005-in.
Noblitt & Rueland is a leading medical device consulting and training firm specializing in FDA and international regulatory issues, including quality systems, auditing, mock FDA inspections, submissions, 510k, CE mark, design control, risk management, software, V&V, electronic recordkeeping (Part 11), electrical safety (IEC 60601-1), and regulatory consulting for FDA and internationally regulated medical industries.
Since its founding in 1970, Nogamigiken Company Ltd. has specialized in ultra-precision grinding technology. The company is proud of its peerless accuracy in parallelism and perpendicularity tolerance of 0.0005 mm or less. Nogamigiken's ultra-precision dies and jigs, created by applying its technology and technique, can stamp and cut a silicon tube and thin film as thin as 0.005 mm with no burrs or deformation.
Nolato Contour specializes in fully validated, automated, medium- to high-volume precision injection molding of thermoplastic and liquid silicone components, including disposable products. Other value-added services include Class 7 and 8 cleanroom molding and medical device assembly. The company has a stringent quality system specific to the medical industry with certifications in ISO 9001:2008 and ISO 13485:2003.
Nolato Medical Solutions is a global, high-tech developer and manufacturer of medical polymer products for market-leading medical technology and pharmaceutical companies. Fifty years of experience in advanced medical technology operations has given the company a firm foundation of cutting-edge expertise and quality awareness, which feature strongly in everything it does.
Nor-Cal Controls distributes pneumatic valves, cylinders, grippers, rotary actuators, fitting and tubing; electronic actuators, sensors, robots; oil-free vacuum pumps, valves, sensors, and controls; dryers, regulators, filters, and controls; and couplers for liquid air, and vacuum. The company's added-value division designs, builds, and test subassemblies for the medical and industrial industries. Nor-Cal is ISO registered 2001–2015.
Nordion is a leading global provider of mission-critical radioisotopes used for the prevention, diagnosis, and treatment of disease. The company ensures the reliable supply of Cobalt-60, the primary input to the gamma sterilization process, to the leaders in healthcare, including sister company Sterigenics.
Nordson EFD LLC is a world-leading manufacturer of precision dispensing systems that apply controlled amounts of all types of assembly fluids used in nearly every industrial manufacturing process. Accurate, repeatable fluid deposits help manufacturers improve process control, which reduces labor time, rework, material waste, and cleanup while increasing output and product quality.
Noren Products manufactures air-to-air and air-to-water heat exchangers for cooling sealed electrical panels without letting contaminants inside (including wash-down, hazardous locations). Compact cabinet coolers prevent failures and downtime caused by overheating electronics. The units are easy to install, low-maintenance and freon-free; cost a fraction of air-conditioning; and are available in Nema 12, 4, 4X, stainless steel. UL listed and CE.
Nortech Packaging specializes in premade pouch fill-and-seal packaging, palletizing, and utilizing robotics for various applications like product loading, case erecting, case loading, case sealing, labeling, and more. As a new Nortech division, Tishma Technologies builds and develops vertical and horizontal cartoners, case packers, and tray packers, and along with Nortech offers full end-of-the-line solutions built to accommodate customer needs.
Nortech and Devicix provide a turnkey portfolio of engineering, design, manufacturing, and postmarket services for the medical device market, making it easy to bring innovative, life-changing products to market. The company specializes in electromechanical applications, including software, electrical, and mechanical engineering; wire/cable assemblies; printed circuit board (PCB) assemblies; integrated device manufacturing; and postmarket service.
North Coast Technical Inc. is a distributor specializing in automation and machine vision systems. The company is featuring the following: Chromasens standard and custom line-scan systems for 2-D, 3-D, multispectral cameras, and high-intensity LED light sources; and Imperx EtherNet/IP™ Process Video Recorders and high-performance area scan cameras for industrial, military, and medical applications ranging from VGA to 47 MPixels.
Northwest Fourslide offers precision stamping and wire forming of thin-gauge metal.
Northwest Stamping & Precision is a global supplier of technical-grade metal stampings and production volume machined components. Prototyping, short-run, and high-speed / high-volume stampings are its core business. The company serves the automotive, medical, aerospace, electronics, and other highly exacting industries. Northwest encourages companies to challenge it with their most difficult requirements.
Northwire Inc., a LEMO-owned company, is a premier partner for the design and manufacture of custom technical wire and cable, retractile cords, cable assemblies, connectors, and harnesses for diverse applications in life sciences, energy, aerospace/defense, industrial, and more.
Novatec Inc. offers material handling sales.
NP Medical Inc. designs and manufactures innovative disposable drug and fluid delivery products for IV therapy. Product lines include needle-free connectors, extension sets, anti-siphon valves, pressure-activated valves, luer activated valves, and bidirectional check valves. The company is FDA registered and ISO 13485 certified, manufacturing all products in the United States in Class 8 cleanroom under cGMP guidelines.
NPI Medical helps medical device, life science, and healthcare OEMs accelerate their new product introductions while redefining their supply chain through a full range of prototype to production (P2P) services, including DFM, LSR tooling and molding, low-volume prototype tooling, bridge tooling, and production molding in an ISO 13485 environment.
NPI Services Inc. is an electronics manufacturing services company, supporting quick-turn electronic assembly requirements of R&D engineering prototypes, preproduction, and low-volume production since 1998. With experience ranging from J-STD-001 performance with Space Addendum to ISO 13485, the company has its customers covered. Send a quote today, and NPI will respond within 48 hours.
NSK Americas is a global manufacturer of ball screws, bearing support units, linear guides, linear actuators, and direct-drive motors. Regarded as a world-leading manufacturer of precision ground ball screws, the company's precision products can be integrated into design specifications across several industries for many applications. To learn more about NSK's integration capabilities, visit the company's booth.
NUBS Plastics Inc. offers custom plastic injection molding, moldmaking, and product development.
Numatic Engineering Inc. is exhibiting the revolutionary Collaborative Robot by Universal Robots. In addition, it will exhibit the latest in end-of-arm tooling, parts feeding/presentation systems, motion control, pneumatics, and conveyors.
The NuSil™ brand, a global leader in medical-grade silicones, brings more than 35 years of success in developing products for the most extreme environments, from deep inside the human body to the harsh conditions of outer space. From drug delivery to implants to general Healthcare, NuSil™ touches one billion lives and counting.
NuTEC Medical, a Prince & Izant Co., is a high-purity precious and nonprecious materials supplier to global medical device manufacturers. The company's product range includes wire; strip; rods; marker bands; micromachined components; micro coils; and brazing alloys made of Pt, Pt-W, Pt-Ir, Pd, Au, Ag, and additional materials per customer need.
NXTNANO is a world leader in high-volume nanofiber production, and serves to deliver commercial nanofiber products to market. The company's novel HYPR Spinning method of nanofiber production permits it great flexibility in the polymers and substances it can spin, while also producing at unmatched speeds.
NyproMold is a world leader in the manufacture of high-precision plastic injection molds for medical devices and disposables. With two manufacturing facilities and 170 industry experts, it serves the most influential healthcare companies and their molders. NyproMold’s comprehensive approach leverages design engineering, analysis, and in-house qualification (including 3-D ProScan industrial CT scanning) to deliver exceptional molding capabilities.
O'Keefe Ceramics offers precision fabrication of advanced ceramics, specializing in precision ceramic machining with close tolerances and intricate geometries. For more than 33 years, the company has been serving the medical, semiconductor, aerospace, food and beverage, and energy industries. O'Keefe's AS9003A quality management system enables it to produce and constantly reproduce ceramic components of the highest quality.
O.C. White is one of the world’s oldest and most respected manufacturers of industrial-quality lighting and inspection tools. From the company's humble beginnings in Worcester, Massachusetts, in 1883, its name is now synonymous with unmatched lighting performance, optical clarity, and ease of use.
OCP Group Inc. is a globally recognized manufacturer of high-performance cable assemblies and wire harnesses. The company will be displaying its line of panel-mount cables, including HDMI panel-mount cables, as well as custom cables for automation, medical, and robotics applications.
OCTOPUZ Inc. is the developer of OCTOPUZ, an offline programming and simulation software for all brands of robots.
Oden Machinery manufactures filling, blending, and transfer systems for liquid products and provides complete turnkey packaging lines for liquid products.
Oerlikon Balzers Coating USA Inc. is one of the world’s leading suppliers of surface technologies. Cleanliness and lubricant-free operation are essential features of medical instruments and equipment. These requirements, however, make surgical instruments correspondingly more subject to wear. In addition to uncompromising high quality, the medical industry demands compliance with biocompatibility regulations.
OGP® is a division of Quality Vision International (QVI) that offers precision video and multisensor coordinate measuring systems used for dimensional inspection, designed and manufactured at its corporate headquarters in Rochester, New York. The company has more than 70 years of industry experience. The products OGP makes fit a range of categories: multisensor metrology, optical inspection, video measurement, laser scanning, and more.
Oina VV AB offers customized solutions for liquid and gas handling, including peristaltic pumps, piston pumps, diaphragm pumps, valves, tubing, fittings, and more.
The OK Sealer division of OKI is focused solely on providing the highest quality, best solution, pouch/bag sealers that fulfill the requirements of its customers’ applications in the best, most cost-effective way. The company's medical bag sealers are now running in more than 50 countries worldwide. The OK medical bag sealers are all manufactured in its plant in Marlborough, Massachusetts.
Okay Industries provides complex metal stampings, laser-cut tubing, precision-machined components, and laser-welded assemblies for the medical device industry. Its proprietary Accu-Blade® technology reduces cut force for surgical blades and scissors. Okay was the co-developer and is now industry leader in Accu-LaserSwiss®, which adds fine laser cutting to a Swissturn machining center for the ultimate in low-cost precision component manufacturing.
Oki Electric Cable Company Ltd. is a manufacturer that has a special technology for high-quality, reliable cable. The company will exhibit some of its ORP series flexible cable; optical fiber, high-flexibility robot vision cable; and flexible printed circuits for medical equipment and factory automation. Attendees who have equipment with cable problems are encouraged to visit Oki's booth.
Oliver™ Healthcare Packaging is a leading supplier of pouches, lidding, roll stock, and mounting cards for the global healthcare industry. The company's packaging protects medical devices, pharmaceutical products, and the like throughout the sterilization, shipment, and storage processes. Headquartered in Grand Rapids, Michigan, and with global manufacturing, Oliver™ is ISO 13485 certified.
OM Sangyo Company Ltd. is a Japanese manufacturer specializing in integrated plating, including glass, graphite, and other surface treatments. The company has more than 75 years of experience and is certified to ISO 9001 and ISO 14001. Visit its booth to learn more.
OMAX® Corp. designs and manufactures complete precision waterjet systems at its U.S. facility. With one of the largest in-house waterjet R&D teams in the world, the company provides the latest technology advancements to deliver faster cutting speeds and decreased downtime. With taper-free and multi-axis cutting capabilities, OMAX's easy-to-use machines cut virtually any material, expanding a shop’s capabilities.
Omron Automation is an industrial automation partner that creates, sells, and services fully integrated automation solutions that include robotics, sensing, motion, logic, safety, and more. Established in 1933 and currently headed by President Yoshihito Yamada, the company’s 36,000 employees help businesses solve problems with creativity in more than 110 countries. Learn more at its Web site.
Onanon Inc. is a designer and manufacturer of connectors and cable assemblies. The company is ISO 9001 and ISO 13485 certified, and FDA and ITAR registered. Onanon provides turnkey solutions that include product innovation and development, validation testing, and manufacturing of connectors and cable products. Its intelligent connector designs incorporate customers' electronics and functionality within the connector platform.
Oncor is a regulated electric transmission and distribution system serving nearly 10 million customers across Texas. Using-cutting edge technology, more than 3,700 employees maintain reliable electric delivery service with the largest distribution and transmission system in Texas. Economic development professionals will be present to discuss economic development services available.
ONOX MTT Company Ltd. solves its clients' technical problems as well as present rationalization plans by suggesting improvements to production methods. The company answers demands for high quality, precision, and cost efficiency by making full use of combined technologies, the latest machinery, and high-efficiency production systems.
Onyx Healthcare USA Inc., with more than 15 years of medical design experience, leverages embedded computing technology to design and manufacture medical-grade (UL60601-1) fanless AiO system platforms and embedded boards as the building blocks to medical device OEM and healthcare IT businesses.
Companies with assembly, packaging, collating, inspecting, and other similar jobs utilize Oparc’s 24,000-sq-ft facility and the skills of its participants to produce high-quality work at a competitive price.
Ophir-Spiricon LLC provides a complete line of laser performance measurement instrumentation, including laser power and energy meters, laser beam profilers, and M2 beam propagation analyzers. Dedicated to continuous innovation in laser measurement, the company holds several patents, including BeamWatch®, the industry’s first noncontact, focus spot size, and position monitor for lasers in material processing.
Perfected over nearly three decades, Optel Group's core expertise resides in the development and integration of innovative vision inspection, verification, and traceability technologies for regulation compliance. The company's finely tuned process for successful project management and integration of complex, custom-designed systems, gives it the unique ability to tailor its current solutions to its customers.
Optimal Design is a product development firm and strategic consultancy that brings innovative products to organizations seeking new technologies, marketplace expertise, collaborative leadership, and unleashed innovation. As a leader in development of connected devices and wearables, the company leverages its industrial design, engineering, and software teams to bring cutting-edge IoT solutions to market.
Optinova Inc. is a world-class thermoplastic and fluoropolymer extrusion solution provider to the medical device industry. Capabilities include single and multilumen tubing as well as exotic profiles, rods, co-extrusion, multilayer, PTFE liners with etched ODs, FEP heat shrink, FEP quick shrink, taper (bump) tubing, IV catheter tubing, and braid-reinforced tubing.
Optiprint AG offers consultation, development, and manufacture at its production facility in east Switzerland. This means that it can guarantee legendary Swiss quality and precision. Optiprint's printed circuit boards are delivered all over the world; apart from the quality, the price is also right.
Orange Coast Pneumatics Inc. is Southern California’s premier pneumatics distribution company featuring SMC Pneumatics, Alicat, Mem-co, AirTrol, Peter Paul, AP Tech, and Mead brands. It is ISO 9001:2008 certified and ISO 13485 compliant. It provides engineering, assembly, packaging, kitting, and vendor-managed inventory services to support the aerospace, automotive, biotech, industrial, medical device, packaging, and semiconductor sectors.
Orchid is a worldwide leader of orthopedic medical device outsourcing, providing contract design and manufacturing services. The company is a strategic sourcing partner that can handle an entire project or provide services at a single point in the process. Orchid has one of the broadest portfolios in the industry, ranging from design and development through finished goods manufacturing and packaging.
Oriental Motor USA Corp. is a manufacturer of electric motion control products for positioning control, speed control, and other automation needs. The company's new products include battery-free absolute positioning motors and actuators, EtherCAT multi-axis drivers, and closed-loop IP66 motors with more gearhead and driver options. Visit Oriental Motor on line for its popular motor sizing calculator and more.
Origin Electric America Company Ltd. manufactures high-precision functional parts in a wide range of areas, including OA devices, medical treatment machinery, and optical instruments. Products include the one-way clutch, the torque limiter, and the one-way hinge, which are utilized with the implementation of original ideas.
Orion Packaging Systems Inc. offers a complete line of semi- to fully automatic stretch-wrapping machines for unitizing pallet loads.
Orion provides certification for ISO 9001, ISO 13485, VCAP, AS 9100, 9110, 9120, TL 9000, R2, RIOS, e-Stewards, ISO 14001, OHSAS, ISO 50001, SFI CoC, and BIFMAe3. Soon, the company will provide SEP, ISO 22301, ISO 20000, and ISO 27001 certification. Companies can customize their certification, including integrated standards and site-sampling with auditors located nationwide.
The Osaka Chamber of Commerce and Industry supports medical device businesses. The organization's main activities are matching services for companies and doctors, advisory services, B-to-B matching events, and holding seminars. It is introducing the Wilmo stimulator by Shasin Kagaku Company Ltd. and production of implantable artificial joints and bone by Yasojima Proceed Company Ltd at the exhibition.